Preserving Flowers in Epoxy Resin: Tips and Techniques

Written by Daisie Team

Published on 10 July 2023 5 min read

There's nothing quite like the delicate beauty of flowers. Even more impressive is their ability to bring that beauty into our homes and lives in the form of epoxy flowers. This art form involves preserving real flowers in epoxy resin, allowing their beauty to last far beyond their natural lifespan. If you're interested in creating your own epoxy flowers, this guide will walk you through everything you need to know, from selecting the right flowers to the finishing touches on your resin piece. Let's get started!

Selecting the Right Flowers

The first step in creating beautiful epoxy flowers is choosing the right blooms. This selection process can seem daunting, but fear not. Here are some pointers to help you make your pick.

Choose Fresh Flowers

To ensure the best results, always opt for fresh flowers. Freshly picked flowers have vibrant colors and supple petals, both of which are key to creating visually appealing epoxy flowers. When you pick your flowers, make sure they are free from any blemishes or wilting — these imperfections can become more noticeable once preserved in resin.

Consider Flower Types

Not all flowers are created equal, especially when it comes to preserving them in epoxy resin. Some flowers, like roses and daisies, hold up well, maintaining their shape and color during the process. Other flowers, like tulips and poppies, can wilt or discolor when exposed to resin. Before you start, research which flowers work best for epoxy flowers.

Pick Seasonal Blooms

Another factor to consider is the season. Seasonal flowers are typically fresher and more vibrant, which can lead to better results. Plus, using seasonal flowers allows you to capture the essence of different times of the year in your epoxy flowers. For instance, cherry blossoms can represent the freshness of spring, while chrysanthemums might evoke the warm tones of autumn.

Preparing Your Flowers

Now that you've got your perfect blooms, it's time to prepare them for their epoxy resin bath. Here's how to clean and dry your flowers properly to ensure they look their best encased in resin.

Clean Your Flowers

Cleaning your flowers is a critical step in the epoxy flower-making process. Start by gently removing any dirt or insects from the petals and leaves using a soft brush. Be careful not to damage the flowers while cleaning—remember, any imperfections will be noticeable once the flowers are encased in the resin. After cleaning, give your flowers a quick rinse with water to remove any remaining debris, then pat them dry with a paper towel.

Dry The Flowers

Drying your flowers is important because water can interfere with the resin curing process, leading to cloudy or bubbly epoxy flowers. To dry your flowers, you can use a flower press or simply place them between the pages of a heavy book. Remember, drying flowers takes time—usually about a week or two. You'll know the flowers are dry when they feel papery to the touch. Patience is key here, but the wait will be worth it when you see your beautiful, clear epoxy flowers!

Working With Epoxy Resin

With your flowers prepared, it's time to get to the heart of the process: working with epoxy resin. This is where the magic happens, transforming your dried flowers into stunning epoxy flowers. Let's dive into how you can choose the right resin, mix it, and keep safe while doing it.

Choose Quality Resin

Not all resins are created equal. For high-quality epoxy flowers, you need high-quality resin. Look for a clear, non-yellowing epoxy resin that's specifically designed for crafting. One popular choice among crafters is EasyCast Clear Casting Epoxy. Remember, investing in a good resin can make the difference between a so-so project and a stunning piece of art.

Mixing The Resin

Mixing resin is more science than art. You'll need to carefully follow the manufacturer's instructions to get the right ratio of resin to hardener. Too much or too little of either can lead to problems with curing. Most resins require a 1:1 ratio, but always double-check! Stir the two components together slowly to avoid introducing bubbles into the mix. And don't skimp on the stirring time—usually, about 5 minutes will do the trick.

Safety First

Working with epoxy resin requires some precautions. Always work in a well-ventilated area to avoid inhaling fumes. Wear gloves to protect your skin—latex or nitrile are good choices. And don't forget eye protection, too. Safety might not be the most exciting part of making epoxy flowers, but it's definitely one of the most important!

Creating Your Resin Piece

Now that you've mastered the art of choosing and mixing your epoxy resin, it's time to bring your epoxy flowers to life. This is where you'll see your careful preparations bear fruit—or flowers, in this case!

Pouring The Resin

First things first, you'll need to pour a thin layer of your mixed resin into your chosen mold. This creates a base for your flowers. Let this initial layer cure until it's tacky, but not completely hard. This stage usually takes about 2-3 hours. It's worth the wait—this step ensures that your flowers stay exactly where you want them in the resin.

Placing The Flowers

Once your base layer is ready, you can start placing your flowers. Use tweezers for precision, and take your time. This isn't a race. Place the flowers face down if you want them to be visible from the front of your finished piece. And remember, sometimes less is more. Overcrowding can make your epoxy flowers look cluttered instead of classy.

Sealing The Piece

After arranging your flowers, it's time to pour another layer of resin. This will seal the flowers in place and give your piece a clear, glossy finish. Pour slowly and evenly, starting in the middle and working your way out to the edges. Once you're done, you'll need to let this layer cure fully. Patience is key here. Trying to remove your piece from the mold too soon can cause it to crack or stick.

Curing and Finishing

Okay, so you've poured, placed, and sealed. Now, we're entering the final stretch: curing and finishing. Just like baking a cake, the last steps are crucial to ensure your epoxy flowers come out looking their best.

Letting It Cure

Once you've sealed your flowers in the resin, you need to leave your piece to cure fully. This might take anywhere from 24 to 72 hours, depending on the type and brand of epoxy resin you're using. It's tempting to hurry this process along, but remember, rushing can lead to a soft or sticky final product. So, let it be—think of it as a flower in the garden, it can't be rushed.

Polishing Your Piece

When your epoxy flowers are completely cured, you'll likely notice that the surface is a bit rough or uneven. That's totally normal, and it's where polishing comes in. Polishing your piece will give it a crystal clear, glass-like finish. Start with a fine-grit sandpaper to smooth out any bumps, then move onto a polishing compound to add shine. And voila! You've got yourself a gorgeous, handcrafted piece of floral art. Now, wasn't that worth the wait?

If you're interested in exploring other creative techniques, check out the workshop 'Affordable DIY Abstract Nail Art Tutorial' by Rachael Mangal. This workshop will teach you how to create unique and beautiful abstract nail art designs at home, giving you another avenue to express your creativity and artistic skills.